Is FILA NO RUST safe to use on polished marble?

Being non-acidic, it's formulated specifically for delicate surfaces like polished marble, where a standard acidic rust remover could etch or dull the finish.

How long does it take to remove a rust stain?

Most rust stains lift within about 15 minutes of application, without needing to be scrubbed in or left overnight.

Does this rust remover need to be diluted before use?

No dilution is required. It's applied directly to the stain straight from the container.

What surfaces can FILA NO RUST be used on?

It's suited to porcelain tiles, concrete, agglomerates, marble, granite, natural stone, and terracotta, covering most common tiled and stone surfaces around the home.

Will removing rust affect a waxed or sealed surface?

If the surface had a protective wax applied, that coating may need to be reapplied afterward, since the rust removal process can affect it.

STRATAFLEX Seam Tape (per roll)

$62.00 - $62.00

$62.00 incl. GST

$62.00 - $62.00

$62.00 incl. GST

Overview

Waterproofing systems often fail at the joints rather than the surface itself. STRATAFLEX Seam Tape is designed to secure those weak points by forming a continuous watertight seal along seams, corners, and floor-to-wall transitions. Made from a double-stick elastomeric material, it bonds firmly with the help of an NAC primer, giving a fast and durable fix. Once applied, flooring or tile installation can continue the same day without holding up the job.

Quantity

Tradie rates?

Key Features

Uses double-stick elastomeric construction for strong, lasting adhesion
Seals joints, seams, corners, and transitions where water is most likely to creep in
Works in both interior and exterior waterproofing applications
Designed to pair with NAC primer for a secure bond
Allows same-day flooring installation to reduce site downtime

Where to Use It

STRATAFLEX Seam Tape is commonly used in wet areas such as bathrooms, showers, and laundries, where water ingress quickly damages substrates. It also performs well outdoors on balconies, decks, and terraces exposed to the weather. Commercial spaces that demand consistent waterproofing, like kitchens or washrooms, benefit from the speed and reliability this seam seal tape provides.

How to Use

Start by preparing the surface, making sure it's clean, dry, and properly primed with NAC primer. Roll the tape over the seam or joint, pressing it firmly into place for full contact. Overlap adjoining strips slightly to keep the barrier unbroken. Once applied, the area is ready for tiling or floor finishes the same day.

Compatible Surfaces

Concrete slabs and screeds
Cement-based boards and plaster finishes
Plywood and timber underlay (when primed)
Existing tiled surfaces (with primer)

Appearance

Supplied as a 6-inch-wide roll of elastomeric double-stick tape with a peel-away backing for straightforward application.

Downloads

Data Sheet Information Sheet

Uses double-stick elastomeric construction for strong, lasting adhesion
Seals joints, seams, corners, and transitions where water is most likely to creep in
Works in both interior and exterior waterproofing applications
Designed to pair with NAC primer for a secure bond
Allows same-day flooring installation to reduce site downtime

Concrete slabs and screeds
Cement-based boards and plaster finishes
Plywood and timber underlay (when primed)
Existing tiled surfaces (with primer)

Supplied as a 6-inch-wide roll of elastomeric double-stick tape with a peel-away backing for straightforward application.

Downloads

Data Sheet Information Sheet

Frequently Asked Questions

1. Do I need to use a primer with STRATAFLEX Seam Tape?
NAC primer is required to get proper adhesion and a fully watertight seal, so it's not an optional step.

2. Can I install tiles immediately after applying the tape?
The system is built for same-day flooring installation, so tiling or floor finishes can go down right after the tape is placed.

3. Is this tape suitable for exterior decks and balconies?
It works across both interior and exterior waterproofing applications, covering wet areas indoors as well as weather-exposed spaces outside.

4. What is the width of the tape?
Each roll measures 6 inches wide, giving solid coverage across seams and transition points.

5. Can it be used over existing tiled surfaces?
Existing tiled surfaces are one of the compatible substrates, provided they're primed correctly with NAC primer beforehand.

Shipping and Return Policy

At Surtec, we aim to make your experience as seamless as possible. Orders are processed efficiently through our Auckland branches and distributed nationwide via our growing logistics network. For any queries about delivery times, product availability, or returning an item, feel free to get in touch with our team. We're here to help you keep your projects moving.